Post by SeñorDonGato on Aug 26, 2008 11:13:07 GMT -5
The tools
The dipstick
The oil drain plug
Slide oil catch under oil drain plug and open it(17-18mm can't remember)
Once the old oil has poured out keep the bolt out and pour some fresh oil in the dipstick hole. This will help flush out the old oil and will be even more important if your switching to synthetic. Inspect the sealing washer and replace if neccesary.
Pour old oil into container for disposal. Measure out 600ml of clean oil. Put the bolt back in and tighten to 18 lbf-ft(Met) 15 lbf-ft(Ruck).
Pour the fresh oil into the engine, put the dipstick back in tight. Turn the scooter on and let it idle for 3 mins and kill engine. Pull dipstick and check to make sure oil level is good
Clean up and dispose of oil properly.
The dipstick
The oil drain plug
Slide oil catch under oil drain plug and open it(17-18mm can't remember)
Once the old oil has poured out keep the bolt out and pour some fresh oil in the dipstick hole. This will help flush out the old oil and will be even more important if your switching to synthetic. Inspect the sealing washer and replace if neccesary.
Pour old oil into container for disposal. Measure out 600ml of clean oil. Put the bolt back in and tighten to 18 lbf-ft(Met) 15 lbf-ft(Ruck).
Pour the fresh oil into the engine, put the dipstick back in tight. Turn the scooter on and let it idle for 3 mins and kill engine. Pull dipstick and check to make sure oil level is good
Clean up and dispose of oil properly.
